VEER ELECTRONICS
Digital Iron Loss Tester

Digital Iron Loss Tester

Send Inquiry

Features :

  • Direct measurement of Watt/kg
  • Immediate Testing of specimen
  • User friendly operation
  • Testing up to 0.65mm thickness
  • Testing for 1.0 - 1.8 Tesla Induction
  • Testing up to 19.00 Watt/kg
  • Portable size, Easy Handling
  • Ultra glow Red LED Display
  • ISO 9001:2008 Compliance

Applications:

  • Transformer Lamination & Motor Stamping Manufacturer, Traders, Suppliers, Users etc.
  • Educational Institutes for Electrical / Metallurgy Department, Electrical Laboratories etc.
  • Transformer, Motor, Pump, UPS, Inverter, Battery Charger, Choke manufacturers.

Introduction :

VEER Electronics make Digital Iron Loss Tester VDW-2065 is portable  Instrument which is very useful to find Watt loss of Electrical Steel immediately. Internationally accepted standard method of testing is Epstein Frame method but that method needs 30mm x 305 mm size & min. 250g weight of material. Stamping, Laminations can not be tested on Epstein Frame because of size. So, we have designed a direct reading type Single Sheet Tester called Digital Iron Loss Tester VDW- 2065 for testing stamping & laminations , EI laminations etc.. 

Specification :

ParameterVDW-2065 (Standard)VDW-2065E (Economy)
Measuring Range0.2 to 19.00 Watt / kg or Watt / lb
Test specimen Thickness0.2 to 0.65 mm
Flux Density1.0 to 1.8 Tesla1.5 Tesla only
Accuracy± 5% rdg ± 0.3% mg (For 10 Sample Avg Reading) @ 1.5 T for standard sample
Measuring Frequency50 / 60 Hz Internally set by default Factory.
Material to be TestCRNO, CRGO, HR, CRC etc.
Power supplyAC 230V ± 10% @ 50 Hz / AC 110V ± 10% @ 60 Hz (on request)
Size of Specimen25mm x 70mm min. required
Size of Instrument (WDH)253mm X 300mm X 123 mm approx.
Weight of Instrument4.5 kg approx.
Warranty1 year against manufacturing defects & Extended optional. No warranty for accessories.